Histological study of eyelid in Algerian locale bovine

Ten pairs of eyelids of adult, healthy cattle of the local breed from the region of Guelma, Algeria, were collected at the slaughterhouse in order to carry out research to determine the structure, the components and to make a comparison with the results of this subject in other ruminants, classical staining techniques such as Hematoxylin & eosin, Masson trichrome and silver nitrate were carried out in the histology laboratory on sections of these membranes, the studied parts were the upper eyelid and lower eyelid, medial and lateral canthus, the results observed were significant, there was a small increase in the thickness of the epidermis in the lower eyelid, and the small sebaceous glands which made the difference between the lower eyelid from local cattle, these glands originate near the basement membrane of the upper eyelids. Regarding the tarsal gland, empty its secretion onto the surface of the eyelid through a duct lined with typical stratified squamous epithelium

Relaxable Damage in Hot-Carrier Stressing of n

A method for device characterization is experimented to qualify the relaxable damage in hot-carrier stressing of n-MOS transistors. The degradation of physical parameters of the body-drain junction of power HEXFETs is presented for applied stress condition Vg= Vd/2. Large decrease of the resistance series, of the ideality factor, and of the reverse recombination current are shown to be related to relaxation time, and are significant at Vg=–Vd. These effects are discussed and explained by the evolution of the interface states

Peltier Effect Applied to the Design and Realization of a New Mass Flow Sensor

The present paper deals with design and realization of a new mass flow sensor using the Peltier effect. The sensor, shaped as a bimetallic circuit includes two continuous parallel strips coated with a great deal of metal plated spots. In such a device, one track performs as a classical thermoelectrical circuitry whose both plated and uncoated parts provide the thermopile junctions. The other strip is subjected to electrical current so as to generate numerous small thermal gradients owing to the Peltier effect. Then, the resulting differences in temperature induce a Seebeck e.m.f. detected by the other strip acting as a receiver. The thermal coupling between transmitter and receiver tracks depends on many variation of the surrounding environment heat transfer coefficient. Therefore, such a device allows us to detect any shift in physical properties related to the apparent thermal conductivity. In special case of a steady state fluid, the induced e.m.f. in the receiving track hinges on the thermal conductivity. When the fluid is in relative motion along the sensor, the velocity can be read out as a funotion of voltage as an application, the sensor is placed into a tube conducting a fluid flow, in order to design a new mass flowmeter

Topographic characteristics of the lymph nodes of the dromedary (Camelus Dromedarius)

ABSTRACT: The architecture of the lymph node dromedary (Camelus dromedarius) differs from that shown in the conventional patterns of other mammalian animals, generally formed of a plurality of aggregates, the latter are surrounded by a connective tissue which extends over the whole area surface lymph node and each cluster is a node itself. Vascular distribution in these lymphoid aggregates is relatively abundant and each node receives one or two afferent lymphatic's and is drained by four or five efferent lymphatics. In approximately half of nodes examined, there was extra nodal communications between the lymphatic vessels (afferent and efferent), allowing to bypass the lymph node. Lymph nodes are characterized by their dromedary lobule appearance and size. This lobulated appearance is acquired with age. Indeed in a camel one day we noticed that although the lymph nodes are large, but rather the lobulation is not clear. All forms are possible was lymph nodes ovoid, flattened, elongated, notched, triangular or rounded in some cases

Utilization of the Thermoelectric Sensor to Realize a New Fluid Level Detector

This paper describes a prototype thermoelectric sensor system which makes use of the thermoelectrical effects. The sensor includes two printed circuits, the first is constituted of a resistive constantan track, the second is a planar thermoelectric circuit constituted of many plated differential thermocouples. The first circuit is placed at the top of the second circuit so that the resistive tack is placed on the top of the even thermocouple junctions. The measuring method consists to passing an electrical current through the constantan track in order to generate temperature gradients between the junction points of the second circuit. Then the resulting temperature differences between the junction points is directly converted into a proportional Seebeck voltage. As an application, the sensor is placed into a reservoir and adapted in order to realize a fluid level detector

Design and Realization a New Thermoelectric Sensor, Application

The present paper deals with design and realization of a New thermoelectric sensor adapted to conceive a circuit breaker, using the thermoelectric effects (Joule, Peltier and Seebeck). The sensor includes two printed circuits. The first is constituted of two resistive tracks of constantan, it is the transmitting circuit. The second, a planar thermoelectric circuit acting as a receiver, is constituted of many plated differential thermocouples. The transmitting circuit is placed on the top surface of the receiver circuit so that the resistive tracks are placed on the levels of thermoelectric junctions. The measuring method consists to passing electrical currents through the resistive tracks in order to generate temperature gradients between junction points of the bimetallic circuit. Then the resulting temperature differences between junction points is directly converted into a proportional Seebeck voltage. As an application, the sensor is adapted to realize a differential circuit-breaker with a low difference current

Cellular dissection of psoriasis for transcriptome analyses and the post-GWAS era

Abstract Background Genome-scale studies of psoriasis have been used to identify genes of potential relevance to disease mechanisms. For many identified genes, however, the cell type mediating disease activity is uncertain, which has limited our ability to design gene functional studies based on genomic findings. Methods We identified differentially expressed genes (DEGs) with altered expression in psoriasis lesions (n = 216 patients), as well as candidate genes near susceptibility loci from psoriasis GWAS studies. These gene sets were characterized based upon their expression across 10 cell types present in psoriasis lesions. Susceptibility-associated variation at intergenic (non-coding) loci was evaluated to identify sites of allele-specific transcription factor binding. Results Half of DEGs showed highest expression in skin cells, although the dominant cell type differed between psoriasis-increased DEGs (keratinocytes, 35%) and psoriasis-decreased DEGs (fibroblasts, 33%). In contrast, psoriasis GWAS candidates tended to have highest expression in immune cells (71%), with a significant fraction showing maximal expression in neutrophils (24%, P < 0.001). By identifying candidate cell types for genes near susceptibility loci, we could identify and prioritize SNPs at which susceptibility variants are predicted to influence transcription factor binding. This led to the identification of potentially causal (non-coding) SNPs for which susceptibility variants influence binding of AP-1, NF-κB, IRF1, STAT3 and STAT4. Conclusions These findings underscore the role of innate immunity in psoriasis and highlight neutrophils as a cell type linked with pathogenetic mechanisms. Assignment of candidate cell types to genes emerging from GWAS studies provides a first step towards functional analysis, and we have proposed an approach for generating hypotheses to explain GWAS hits at intergenic loci.http://deepblue.lib.umich.edu/bitstream/2027.42/109537/1/12920_2013_Article_485.pd

Characterization of CrN/CrAlN/Cr2O3 Multilayers Coatings Synthesized by DC Reactive Magnetron Sputtering

The CrN/CrAlN/Cr2O3 multilayer coatings were deposited by reactive magnetron sputtering DC on 90CrMoV8 stainless steel under various oxygen flow rates. The structure and crystalline phases are characterized by the x-ray diffractometer. Through SEM, a dense and coherent is revealed in CrN/CrAlN/Cr2O3 multilayer coatings. The friction and wear behaviors obtained with the ball-on-disc test show that all multilayer films exhibit a good wear resistance, especially the one with an oxygen flow rate of 10 sccm. Nevertheless, in sea water the film without a top layer of Cr2O3 have the lowest coefficient of friction. This behavior is attributed to the interfacial strengthening and the existence of the upper passivation layer Cr2O3. Adding to that, the film obtained under an oxygen flow rate of 10 sccm show the lowest grain size and the maximum hardness and elastic modulus could Respectively, 45 and 417 GPa.Région Bourgogn

Twelve-month observational study of children with cancer in 41 countries during the COVID-19 pandemic

Introduction Childhood cancer is a leading cause of death. It is unclear whether the COVID-19 pandemic has impacted childhood cancer mortality. In this study, we aimed to establish all-cause mortality rates for childhood cancers during the COVID-19 pandemic and determine the factors associated with mortality. Methods Prospective cohort study in 109 institutions in 41 countries. Inclusion criteria: children &lt;18 years who were newly diagnosed with or undergoing active treatment for acute lymphoblastic leukaemia, non-Hodgkin's lymphoma, Hodgkin lymphoma, retinoblastoma, Wilms tumour, glioma, osteosarcoma, Ewing sarcoma, rhabdomyosarcoma, medulloblastoma and neuroblastoma. Of 2327 cases, 2118 patients were included in the study. The primary outcome measure was all-cause mortality at 30 days, 90 days and 12 months. Results All-cause mortality was 3.4% (n=71/2084) at 30-day follow-up, 5.7% (n=113/1969) at 90-day follow-up and 13.0% (n=206/1581) at 12-month follow-up. The median time from diagnosis to multidisciplinary team (MDT) plan was longest in low-income countries (7 days, IQR 3-11). Multivariable analysis revealed several factors associated with 12-month mortality, including low-income (OR 6.99 (95% CI 2.49 to 19.68); p&lt;0.001), lower middle income (OR 3.32 (95% CI 1.96 to 5.61); p&lt;0.001) and upper middle income (OR 3.49 (95% CI 2.02 to 6.03); p&lt;0.001) country status and chemotherapy (OR 0.55 (95% CI 0.36 to 0.86); p=0.008) and immunotherapy (OR 0.27 (95% CI 0.08 to 0.91); p=0.035) within 30 days from MDT plan. Multivariable analysis revealed laboratory-confirmed SARS-CoV-2 infection (OR 5.33 (95% CI 1.19 to 23.84); p=0.029) was associated with 30-day mortality. Conclusions Children with cancer are more likely to die within 30 days if infected with SARS-CoV-2. However, timely treatment reduced odds of death. This report provides crucial information to balance the benefits of providing anticancer therapy against the risks of SARS-CoV-2 infection in children with cancer